News RSS

Question: I am building a custom HPA setup and notice different thread types listed for regulators, lines, and adapters. What are the differences between G1/8 BSPP, M5, and 1/8 NPT, and which ones do I need to ensure a leak-free connection? Answer: Thread compatibility is one of the most overlooked aspects of building a reliable HPA system. Using the wrong thread type—or forcing mismatched threads—causes leaks, damaged components, and unsafe connections. 1/8 NPT (National Pipe Taper) is the most common standard on US-sourced HPA regulators, tanks, and remote lines. These threads are tapered, meaning they seal via thread interference and...

Question: I want to convert my KWA MP7 to HPA, but I am confused about which adapter version I need. How do I identify the correct magazine type for my specific gun? Answer: The KWA MP7 platform has two distinct magazine generations that are not cross-compatible with HPA adapters, so identifying yours is the critical first step. NS1 (Original) Magazines: Visual ID: The base plate is secured by a single roll pin running horizontally through the bottom of the mag body. Feed Lip: Usually features a distinct "step" or ridge on the feed lip geometry. Construction: Often heavier, with a...

Question: I just bought an HPA adapter for my gas blowback pistol. What type of air line and fittings do I need to connect it to my tank and regulator, and does line length affect performance? Answer: Most HPA adapters — including those designed for platforms like the Hi-Capa, AAP-01, Glock, MK23/SSX23, SSQ22, Beretta M9, KWA MP7, G-series, and MP5 — utilize a standard 1/8 NPT female thread on the adapter body. This is the universal connection point for your air line. You will need a male 1/8 NPT fitting on one end of your hose. The other end must...

Question: What is the difference between standard output and low-pressure output HPA regulators, and how do I choose the right one for my gas blowback pistol setup? Answer: The output pressure of your HPA regulator determines the air pressure delivered to your gun, and selecting the correct type is critical for both performance and safety. Most modern HPA regulators fall into two categories: Standard Output (often called High Pressure or HP), typically preset around 800–850 PSI, and Low Pressure (LP), typically preset around 300–450 PSI. Gas blowback pistols — including platforms like the Hi-Capa, AAP-01, Glock, MK23/SSX23, Beretta M9, and...

Question: Can I run an Action Army AAP-01 on HPA using a Primary Airsoft adapter, and what performance changes should I expect? Answer: Yes, the Action Army AAP-01 is fully compatible with Primary Airsoft HPA adapters, and it is one of the most popular platforms for conversion due to its robust internal design and high cyclic rate potential. Primary Airsoft (https://primaryairsoft.us/) offers a dedicated HPA adapter for the AAP-01 that replaces the standard green gas magazine base plate, allowing you to feed the gun directly from a regulated air line. When switching from green gas to HPA on the AAP-01,...