News RSS

Question: Can I run my Novritsch SSX23 on HPA using M4 magazines? Answer: Yes. The SSX23 and SSQ22 share a compatible magazine well, allowing a dedicated HPA adapter to feed from standard M4/AR-pattern AEG magazines. This conversion eliminates the gas reservoir inside the pistol magazine, removing cooldown inconsistency and the need to top off green gas between games. Because the SSX23 uses a non-blowback (NBB) action, the bolt remains stationary during firing. This means every joule of energy propels the BB forward rather than cycling a slide, resulting in exceptional gas efficiency and a significantly quieter report — ideal for...

Question: What are the trade-offs between using M4 and MP5 magazines with a Primary Airsoft HPA adapter for my Glock or AAP-01? Answer: Choosing between M4 and MP5 magazines for your HPA-converted Glock or Action Army AAP-01 changes the gun’s balance, reload ergonomics, and gear compatibility. Both options feed reliably through Primary Airsoft’s adapters (https://primaryairsoft.us/), but they suit different playstyles. M4 Magazines (STANAG) M4 mags are the universal standard. If you already run an M4 AEG or HPA rifle, you share spare magazines, pouches, and loaders across platforms. This simplifies logistics and reduces cost. High-capacity drum mags (like the 1500-round...

Question: What are the trade-offs between running an HPA-tapped GBB pistol with M4 magazines versus a drum magazine adapter? Answer: Both setups feed High Pressure Air into a gas blowback pistol, but they solve different problems. An M4 magazine adapter (such as those for the TM/WE Hi-Capa, Glock/G-series/AAP-01, MK23/SSX23, 1911, Beretta M9, CZ P09, CZ SP-01 Shadow 2, KWA MP7/KMP9, SMC9/GTP9, or KJW KC02) replaces the pistol’s gas reservoir with a standard M4/AR AEG mid-cap or high-cap. This keeps the pistol profile slim, allows use of magazines you likely already own, and lets you top off ammo mid-game without tools....

Question: My HPA-tapped pistol double-feeds or rolls BBs out of the barrel. What causes this and how do I fix it? Answer: Double feeds and roll-outs usually point to a nozzle length mismatch or a magazine seating issue. On a gas blowback platform converted to HPA, the nozzle must protrude far enough to seat a BB fully into the hop-up bucking lips, but not so far that it jams against the bucking or prevents the slide from cycling fully. First, verify the nozzle length. Most aftermarket HPA nozzles for Tokyo Marui-spec Hi-Capas, Glocks, and 1911s run between 21.5 mm and...

Question: My HPA-tapped pistol hisses but still shoots. How do I find exactly where the air is escaping without taking the whole gun apart? Answer: Start by pressurizing the system and listening closely. A leak at the fill valve or tank regulator usually presents as a steady hiss from the line or stock — tighten fittings with PTFE tape on tapered threads only. If the sound comes from the magazine baseplate or feed lip area, the magazine O-ring or feed tube seal is likely worn; Primary Airsoft stocks replacement O-rings and feed tubes for their Hi-Capa, Glock/AAP-01, MK23, and other...